GPIB SWITCH2 Product Information
The National Instruments GPIB-SWITCH2 is a manually operated mechanical switch used to connect two IEEE 488-compatible devices to one common IEEE 488-compatible device. Edition Date: December-1994 URL: http://digital.ni.com/manuals.nsf/websearch/65FCBF8E488A78368625665D0064918D

Getting Started with Your GPIB-ENET and the NI-488.2M Software for Solaris 2 and Specifications
This manual contains instructions for installing and configuring the National Instruments GPIB-ENET and NI-488.2M multitasking software driver for use with the Sun SPARCstation running under the Solaris 2.1 operating system. This manual is meant to be used with the National Instruments IEEE 488.2 Edition Date: December-1994 URL: http://digital.ni.com/manuals.nsf/websearch/DB4F42D3CDC81E198625665E006358C1

Getting Started with Your VXI/VME-AT2010 and the NI-VXI Software for Windows
This manual contains instructions for installing and configuring the National Instruments VXI-AT2010 or VME-AT2010 interface kit for Windows. The VXI-AT2010 kit includes a VXI-MXI module that plugs into a VXI mainframe and links your PC AT to the VXIbus. The VME-AT2010 kit comes with a VME-MXI that Edition Date: December-1994 URL: http://digital.ni.com/manuals.nsf/websearch/A91E4365C03750B68625665E006C0AC1

AMUX-64T User Manual
This manual describes the mechanical and electrical aspects of the AMUX-64T and contains information about configuring, operating, and programming the AMUX-64T. The AMUX-64T is a front-end analog multiplexer that quadruples the number of analog input signals that can be digitized with a National Edition Date: November-1994 URL: http://digital.ni.com/manuals.nsf/websearch/55BB2423AB8586F186256694004EE8E9

Getting Started with Your GPIB-PCII/IIA and the NI-488.2 Software for Windows
This manual contains instructions for installing and configuring the National Instruments GPIB-PCII/IIA interface board and the NI-488.2 software for Windows. The NI-488.2 software is intended for use with Windows version 3.1 or higher. This manual assumes that you are already familiar with the Edition Date: November-1994 URL: http://digital.ni.com/manuals.nsf/websearch/F38B51FDB35CA16686256DB1004B3F09

Getting Started with Your GPIB-PCII/IIA and the NI-488.2 Software for DOS
This manual contains instructions for installing and configuring the National Instruments GPIB-PCII/IIA interface board and the NI-488.2 software for DOS. The NI-488.2 software is intended for use with MS-DOS (version 3.0 or higher) or equivalent. This manual assumes that you are already familiar Edition Date: November-1994 URL: http://digital.ni.com/manuals.nsf/websearch/B588BC5F2C13247A86256DB1004AFF4A

LabWindows/CVI Test Executive Toolkit Reference Manual
The LabWindows/CVI Test Executive Toolkit Reference Manual describes the LabWindows/CVI add-on package you can use for automated sequencing of test programs. Edition Date: November-1994 URL: http://digital.ni.com/manuals.nsf/websearch/2F2070C2543F41948625665E00642907

Warning: Maximum Signal Ratings for AT-MIO Series Boards
Note: National Instruments is not liable for any damages resulting from signal connections that exceed these ratings. Refer to your warranty for specific information on warranty coverage. Connections that exceed any of the maximum ratings of input signals on the following AT-MIO Series boards can Edition Date: November-1994 URL: http://digital.ni.com/manuals.nsf/websearch/CB098A8243B0514D8625665E0063595C

DAQ Board Accessories Rack-Mount Kit Installation Guide
This guide describes how to assemble the rack-mount hardware for the AMUX-64T analog multiplexer board and the SC-205X, SC-206X, SC-207X, and BNC-208X Series signal conditioning boards in a standard 19-in. rack-mount cabinet. Edition Date: October-1994 URL: http://digital.ni.com/manuals.nsf/websearch/E5987643BF5CE9D18625665E0062DAD8

Documentation Notice: AT-GPIB and Windows Compatibility
The built-in GPIB Talker/Listener/Controller port on your VXIpc-486 module is application compatible with the National Instruments AT-GPIB plug-in board, the industry-standard GPIB interface for ISA (PC AT) computers. Your VXIpc-486 port uses the same GPIB hardware circuitry as the AT-GPIB, Edition Date: October-1994 URL: http://digital.ni.com/manuals.nsf/websearch/873B5B24F6FC68518625665E006359F9